|Eases life in the laboratory. With this laboratory software, you can network up to 64 laboratory devices simultaneously via one PC. That makes the automation of your laboratory experiments and processes possible.
Measurements and processes may be run independently from one another. This helps to avoid long waits and you increase your productivity. The communication between PC and laboratory device is performed via the serial interface RS 232 (COM1 or COM2). With the help of plug-in cards and Ethernet RS 232 servers, up to 64 laboratory devices can be used simultaneously via one PC. All laboratory instruments can be controlled independently from each other and the measured values (speed, temperature, torque, pH, etc.) can be documented separately.
Hard- and software requirements:
Pentium 90 with at least 16 MB RAM, and a mouse. VGA display: monochrome with at least 16 levels of grey or color.
With labworldsoft® you can network up to 64 laboratory instruments simultaneously via one PC. From sample preparation to synthesis, all steps of research and development in the lab can be automated using labworldsoft®.
Desired temperature and speed sequences can be precisely controlled by means of freely selectable ramp functions. The ramp functions can be graphically generated, stored, and then loaded again at any time.
labworldsoft® enables a fast and easy recording of many physical parameters which are required in the laboratory, such as pH, conductivity, temperature, torque, weight, pump rates etc.
Data acquired in labworldsoft® can be exported into standard applications. For example it is possible to measure the speed during a test, save the data in a standard format (.txt or ASCII) and analyze in any chart calculation, i.e. Excel.
Storing / reproducing measured data
Do your test arrangements repeat themselves? With labworldsoft® all test arrangements can be stored. The stored data is available to reproduce the test, at a mouse click. The reproductability of tests is warranted within the scope of ISO 9000 and within GLP.
For documentation purposes, all measuring results as well as the measurement
flowcharts can be printed or plotted according to GLP, ISO and QA.
|C 5040 CalWin
|PC control and evaluation software for all IKA® calorimeters
(C 200, C 2000, C 5000, C 7000, C 4000).
requires a PC running any of the following operating systems:
Windows 95 / 98 / ME / NT / 2000 or XP, and at least one free serial interface
and 50 MB of available disk space.
-Control, monitor and view working procedures
-Print and save measurement protocols
-Identify and record samples
-Administration of sample racks C 5020
-Flexible administration and evaluation of calibrations
-Flexible administration and grouping of measurements
-Printing and saving calibration and result protocols suitable for certification
-Data transfer through COM to EXCEL and ACCESS
-Preprocessed work sheets for EXCEL (configarable by the user)
C 5040 CalWin
C 5041.10 conecting cable