Search
 

 
R 1300 Dissolver stirrer

Radial flow, for drawing the material to be mixed from the top and the bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.

 

Stirrer diameter 80 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

 


R 1300 Dissolver stirrer
Order
Item:
0513500
Data Sheet
Data Sheet
 
 
 
R 1302 Dissolver stirrer
Radial flow, for drawing the material to be mixed from the top and the bottom.

 

Stirrer diameter 100 mm
Shaft diameter 10 mm
Shaft length 350 mm
Speed max. 1000 1/min

R 1302 Dissolver stirrer
Order
Item:
2387900
Data Sheet
Data Sheet
 
 
 
R 1303 Dissolver stirrer
Radial flow, for drawing the material to be mixed from the top and the bottom.

 

Stirrer diameter 42 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

R 1303 Dissolver stirrer
Order
Item:
2746700
Data Sheet
Data Sheet
 
 
 
R 1311 Turbine stirrer
For drawing the material to be mixed from above. Generates axial flow in the vessel. Minimum danger of injury when contact is made with vessel.

 

Stirrer diameter 30 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

R 1311 Turbine stirrer
Order
Item:
2332900
Data Sheet
Data Sheet
 
 
 
R 1312 Turbine stirrer
For drawing the material to be mixed from above. Generates axial flow in the vessel. Minimum danger of injury when contact is made with vessel.
.

 

Stirrer diameter 50 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

R 1312 Turbine stirrer
Order
Item:
2333000
Data Sheet
Data Sheet
 
 
 
R 1313 Turbine stirrer
For drawing the material to be mixed from above. Generates axial flow in the vessel. Minimum danger of injury when contact is made with vessel. .
.
Stirrer diameter 70 mm
Shaft diameter 10 mm
Shaft length 400 mm
Speed max. 800 1/min

 


R 1313 Turbine stirrer
Order
Item:
2333100
Data Sheet
Data Sheet
 
 
 
R 1330 Anchor stirrer
Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.
.
Stirrer diameter 45 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 1000 1/min

 


R 1330 Anchor stirrer
Order
Item:
2022300
Data Sheet
Data Sheet
 
 
 
R 1331 Anchor stirrer
Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.
.
Stirrer diameter 90 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 1000 1/min

 


R 1331 Anchor stirrer
Order
Item:
2022400
Data Sheet
Data Sheet
 
 
 
R 1332 (PTFE-coated) Anchor stirrer
Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.
.
Stirrer diameter 60 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 800 1/min

 


R 1332 (PTFE-coated) Anchor stirrer
Order
Item:
2343700
Data Sheet
Data Sheet
 
 
 
R 1333 Anchor stirrer
Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.
.
Stirrer diameter 150 mm
Shaft diameter 10 mm
Shaft length 550 mm
Speed max. 800 1/min

 


R 1333 Anchor stirrer
Order
Item:
2747400
Data Sheet
Data Sheet
 
 
 
R 1335 Kneading stirrer

Tangential flow with oscillating compacting between the kneading surfaces. Minimum deposits on vessel. Used at low speeds.


.

Stirrer diameter 45 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

 


R 1335 Kneading stirrer
Order
Item:
2022500
Data Sheet
Data Sheet
 
 
 
R 1342 Propeller stirrer, 4-bladed

Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.
.

Stirrer diameter 50 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

 


R 1342 Propeller stirrer, 4-bladed
Order
Item:
0741000
Data Sheet
Data Sheet
 
 
 
R 1345 Propeller stirrer, 4-bladed

Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.
.

Stirrer diameter 100 mm
Shaft diameter 8 mm
Shaft length 540 mm
Speed max. 800 1/min

 


R 1345 Propeller stirrer, 4-bladed
Order
Item:
0741300
Data Sheet
Data Sheet
 
 
 
R 1352 Centrifugal stirrer

Two-bladed, blades open with increasing speed. For stirring in round vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.
.

Stirrer diameter 60 / 15 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

 


R 1352 Centrifugal stirrer
Order
Item:
0756900
Data Sheet
Data Sheet
 
 
 
R 1355 Centrifugal stirrer

Two-bladed, blades open with increasing speed. For stirring in round vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.
.

Stirrer diameter 100 / 24 mm
Shaft diameter 8 mm
Shaft length 550 mm
Speed max. 800 1/min

 


R 1355 Centrifugal stirrer
Order
Item:
1132700
Data Sheet
Data Sheet
 
 
 
R 1373 Paddle stirrer

Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds.
.

Stirrer diameter 70 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 1000 1/min

 


R 1373 Paddle stirrer
Order
Item:
0757600
Data Sheet
Data Sheet
 
 
 
R 1375 Paddle stirrer

Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds.


Stirrer diameter 70 mm
Shaft diameter 8 mm
Shaft length 550 mm
Speed max. 800 1/min

 


R 1375 Paddle stirrer
Order
Item:
0757700
Data Sheet
Data Sheet
 
 
 
R 1376 Paddle stirrer

Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds.


Stirrer diameter 150 mm
Shaft diameter 10 mm
Shaft length 550 mm
Speed max. 800 1/min

 


R 1376 Paddle stirrer
Order
Item:
0757800
Data Sheet
Data Sheet
 
 
 
R 1381 Propeller stirrer, 3-bladed

Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.


Stirrer diameter 45 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

 


R 1381 Propeller stirrer, 3-bladed
Order
Item:
1296000
Data Sheet
Data Sheet
 
 
 
R 1382 Propeller stirrer, 3-bladed

Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.


Stirrer diameter 55 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 2000 1/min

 


R 1382 Propeller stirrer, 3-bladed
Order
Item:
1295900
Data Sheet
Data Sheet
 
 
 
R 1385 Propeller stirrer, 3-bladed

Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.


Stirrer diameter 140 mm
Shaft diameter 10 mm
Shaft length 550 mm
Speed max. 800 1/min

 


R 1385 Propeller stirrer, 3-bladed
Order
Item:
0477700
Data Sheet
Data Sheet
 
 
 
R 1388 Propeller stirrer, 3-bladed

Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.


Stirrer diameter 140 mm
Shaft diameter 10 mm
Shaft length 800 mm
Speed max. 400 1/min

 


R 1388 Propeller stirrer, 3-bladed
Order
Item:
0477800
Data Sheet
Data Sheet
 
 
 
R 1389 (PTFE-coated) Propeller stirrer, 3-bladed

Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.


Stirrer diameter 75 mm
Shaft diameter 8 mm
Shaft length 350 mm
Speed max. 800 1/min

 


R 1389 (PTFE-coated) Propeller stirrer, 3-bladed
Order
Item:
2343600
Data Sheet
Data Sheet
 
 
 
R 2302 Propeller stirrer, 4-bladed

Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.


Stirrer diameter 150 mm
Shaft diameter 13 mm
Shaft length 800 mm
Speed max. 600 1/min

 


R 2302 Propeller stirrer, 4-bladed
Order
Item:
0739000
Data Sheet
Data Sheet
 
 
 
R 2305 Propeller stirrer, 4-bladed

Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.


Stirrer diameter 150 mm
Shaft diameter 13 mm
Shaft length 550 mm
Speed max. 1300 1/min

 


R 2305 Propeller stirrer, 4-bladed
Order
Item:
0739300
Data Sheet
Data Sheet
 
 
 
R 2311 Paddle stirrer

Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds.


Stirrer diameter 150 mm
Shaft diameter 13 mm
Shaft length 800 mm
Speed max. 600 1/min

 


R 2311 Paddle stirrer
Order
Item:
0739500
Data Sheet
Data Sheet
 
 
 

 

 

 

 
 
 
 
Home | Bargin Bin | Contact Thermometer | Dispersing Elements | Magnetic stirring bar | Stirring Elements | Bomb Calorimeters | Homogenizers | Batch Homogenizers |Inline Homogenizers | Sealed System Homogenizers | Homogenizer Dispersing elements | Hot Plates Baths| Hotplates w/ Stirring | Lab Mills |Lab Reactors | Vortex Lab Shakers | Reciprical Lab Shakers | Orbital Lab Shaker | Incubating Lab Shaker | Lab Software | Magnetic Stirrer With Heat | Magnetic Stirrer Without Heat | Magnetic Stirrer Multi position with heat | Multi position Magnetic Stirrer with heat | Mechanical Overhead Mixers | Electrical Overhead Mixers | Lab Pipettes | Rotary Evaporators | Thermostats